Products and services

Lighting control

Wireless control

Dry contact output interface

The Gentec Contact Output Interface offers four dry contact outputs to interface with third-party devices and control systems. With type-C contacts rated for 1 amp at 30 VDC, it can interface with almost any equipment creating a hybrid control solution.

Each output can be set up individually, linked to one or many wireless switches or sensors based on standard profiles.

Supported profiles:

  • Key card activated switch
  • Rocker switch
  • Occupancy sensor
  • Photo sensor
  • Window/door contact
  • Central command, switching and set point

The Contact Output Interface is the easiest method of integrating wireless devices into existing panels, wired control systems, or energy management systems. When used together with the Gentec Contact Input Interface, a true hybrid control solution is possible leveraging wireless versatility with the performance of wired networked systems.

  • Four dry contact type-C relay channels
  • Each channel operates separately, switch or sensor commands from linked wireless devices trigger the output
  • Low voltage interface to fire alarm, security, lighting, or control panels
  • Easy integration into any Energy Management System
  • Doubles as a repeater
  • Panel or DIN rail mount for tidy mounting applications
  • LED interface for channel status indication
  • Pluggable terminal strips
  • Supports key card switch , rocker switch, occupancy sensor, photo sensor, window switch, and central command profiles
  • Versatile 8–30 VDC or 24 VAC input power

Listing and Compliance

Radio Frequency (902 MHz):

  • FCC Part 15.231– Remote Control Transmitter
  • IC RSS-210

Hardware Specifications

  • Power Supply: 8–30 VDC or 24 VAC power input, 250 mA maximum draw
  • Inputs: CH. Select, LEARN, and CLEAR buttons
  • Outputs:
          • Four dry contact type-C relays (Com, N.C., N.O.)
          • Contact rating: 1 A, 30 VAC/DC max
          • Two LEDs per channel: Red – CH.MODE
          • Green – RELAY STATE


  • Radio Frequency: 902 MHz
  • Antenna: Whip
  • Transmission Range: 24 m (80 ft): commercial office spaces (typical), up to 100 m (330 ft) line of sight

Mechanical Specifications

  • Operating Temperature: –10 °C to 45 °C (14 °F to 113 °F)
  • Relative Humidity: 5 % to 95 % non-condensing
  • Weight 111 g (3.9 oz)
  • Dimensions: 76.2 x 127 x 27 mm (3 x 5 x 1 in)
  • Mounting: Two screws (not included)