You are here : Gentec > Capacitors > H.V. Rackmount > H.V. Pole and Rack Mounted
H.V. Pole and Rack Mounted
PM1000 Series
- Brochure
- Data Sheets & Drawings
- Technical Specification
- Design Guide
- Instruction Manual
- Accessories
- Info/FAQ Request Forms
High Voltage Open Rack (Auto-Fixed Bank)
Pole Mounted Bank
The PM1000 Pole-Mounted Capacitor Banks are pre-wired, factory assembled, and shipped ready for pole installation with single phase capacitor units. Racks are made of welded structural aluminum and are suitable for mounting switches and junction box and cable assembly. Lightning arresters and/or potential transformers can also be mounted (in option).
Specifications:
| Assembly | 3 or 6 units per rack |
| Isolation Class | 60, 95, 125 and 150 kV BIL |
| Rated Power | 150 to 1200 kVAR |
| Rated Voltage | 5, 15, 25 and 35 kV |
RM1000 Series
- Brochure
- Data Sheets & Drawings
- Technical Specification
- Design Guide
- Instruction Manual
- Accessories
- Info/FAQ Request Forms
Open Outdoor Rack
The RM1000 Open Rack Automatic Capacitor Bank is built up from high voltage all-film dielectric capacitor units with separate internal fuses in each element for assembly of outdoor substation applications. Industrial design easy to install and providing automatic P.F. control on power distribution lines for industry.
Specifications:
| Construction Standards | UL, CSA, IEC |
| Continuous Over-Current | 135 % |
| Continuous Over-Voltage | 110 % |
| Insulation Level | 60, 75, 95, 125 kV BIL |
| Mounting Type | Outdoor Rack |
| Power Factor Controller | 12 Steps, NC12 Controller |
| Rated Frequency | 50 Hz or 60 Hz |
| Rated Power | 2000 to 12000 KVAR/Unit |
| Rated Voltage/Phase | 7.5 to 25 kV/3 Phases |
Options:
| Ground Switch |
| Load Break Switch |
| Oil or Vacuum Switch |
| VAR Controller |
