You are here : Gentec > Data Acquisition Systems > Management Software
Management Software
ANNONCIATEUR
The Annonciateur product allows visualizing in a chronological order a list of points that are in an alarm status. An input will be in alarm status upon these conditions:
- A discrete input whose status has changed;
- An analog input whose threshold has been exceeded;
- A custom alarm labeled with a code and description;
- Second-based resolution;
- 0 to 60-second time-out;
- Alarm cancellation;
- Audio reminder, alarm acknowledgment and reminder;
- Serial communication through an SMP terminal station;
- 1 to 4 896-point capacity, according to hardware configuration;
- (Up to 1 792 transmitted to CER).
MEASURE
The Measurement product allows visualizing a table of analog measurements acquired through the analog cards.
- Up to 8 columns and 15 lines;
- Several pages per display;
- Display color depends on the measurement's status;
- Serial communication through an SMP terminal station.
ECE
The ECE product records and alerts upon each status change of a digital input with a 1-ms resolution.
- 1-ms resolution;
- Transmission to the acquisition and processing centre;
- Remote polling through a PT-ECE console;
- When equipped with a HMI, visualization of the change history page;
- Importation of an existing database from CESAME/COPA;
- Capacity of 1 to 4 896 points, depending on hardware configuration.
Additional Functions
When equipped with a Human-Machine Interface (HMI), these products also offer history functions, logical equations and maintenance.
History
The history function permits visualizing changes that occurred in chronological order.
- Alarm type change, ECE and system events;
- Choice of data to display;
- Memory of the last 5000 changes;
- Memory of last actions performed.
Logical Equations
Allthese products include an application that permits applying logical equations to input/output variables (+, -, =, <, >, IF, GO TO, ...).
Maintenance
In order to facilitate product maintenance, when equipped with a HMI, a module is available at all times. In the System Status window, this application permits seeing the information on current applications (software versions, checksums), present clients/suppliers, as well as the status of inputs/outputs. Also, the maintenance function permits "removing" points. A removed point is no longer visible in alarm page and is not transmitted to the CER. However, it remains visible to maintenance personnel.
